Gift Bag Card

Tutorial..

Lets take sizes... I used

2 x 9cm x 16cm white card stock

2 x 8.5cm x 15.5 cm light green card stock

2 x 8cm x 7.5cm backing paper from Victorian Romance cd ( Joanna Sheen)

Topper image cut into a circle with Nestabilities from Victorian Romance cd ( Joanna Sheen)

Scalloped Circle light green card stock

Punch out slots on both cards at the top, the best way to do this is to punch out the 1st then line this up with the next piece turn the punch upside down and align the Punch so the hole will be punched in exactly the same place keeping the 2 pieces of card together and re-punching.

Stick the next size card (mine was light green) down on top of the white card covering the slot holes, these will be re-punched.

I punched out the holes again by aligning the punch up with the first slot holes, then add the background paper the ribbon and the front embellishment.

Put the card pieces to one side until you need them.

Now to making the bag - you will need a piece of A4 paper

Along the long side of the A4 paper score at 2", 5". 7" & 10" there will be a small piece left over at the end.

Turn the paper 45% and make a score line at 2" down the length of the paper.

Fold all of the score lines before moving on to the next instructions.

At the extra edge that was left over from the first set of score lines add double sided tape, this edge will stick down on the inside of the bag as shown in the 2nd image.

At the side of the paper where the 2" scoreline is you with fold this to form the base the best way to describe how this is done is imagine you are wrapping a parcel creasing in the short sides of the bag first so that you are left with triangle points on the wider sides.

stick these triangles down with strong double sided tape.

From the open end of the bag crease both of the sides inwards as you get near to the bottom you will need to turn up the base of the bag as shown in the second image

You can see the bottom of the bag shaped so that there is a V shape in the bottom of the bag this allows the bag to open when everything is stuck in place.

The second picture is showing the bag stuck down with strong double sided tape to the back card.

Add tape to the last side and align up the card front before completely removing the tapes.

Side view of finished bag.

To see more of Jaks work you can visit her Blog at http://crafterskitchen.blogspot.com/

Using Plastic Stencils in the Cuttlebug

Hi all, Ive been really enjoying experimenting with my cuttlebug and I'm so pleased i bought one. Ive been able to drag out supplies i haven't used in a long while and use them now in an even easier way than before. So drag out all your plastic stencils and today I'll show you what i taught to all my Monday card ladies....enjoy
Open up your cuttlebug and put in your A plate then B plate on top and then your plastic stencil.

Next lay your card over the top of your stencil.

Now lay your silicone baking mat over the top of your card.

As a shim i use 4 layers of card....as you can see these are the backings off the emboss folders you get....this way you will all know exactly how thick it should be.

lastly lay your second B plate over the top to complete the sandwich and roll through. Remember to never force anything through your machine...if your silicone baking mat is thicker than mine just leave out one of the card shims....and the results.....

What i found most annoying was that hole they use to hang the stencils in the shop.....but I just cut around mine and colored it with chalks...here's a close up

Turned out like a fancy Lilly pad for my cute little frog. Well i hope this has inspired you to use some of your old supplies....see we didn't waste money buying all those stencils !! :)...Valita

A note from Julie

Wonderful Tutorial Valita and as I'm a proud owner of a cuttlebug myself I will definitely be giving this a go !!

Everybody go and check out Valita's fantastic Blog HERE it is full with inspiration!!!

Gift box-in-a-bag

I originally saw a "box-in-a-bag" on THIS blog and absolutely loved it! I also love to do tutorials. So after making my own version of this bag and tweaking a couple things for my own personal tastes, I present to you a "Bag-in-a-box tutorial"! Let me know what you think!

SUPPLIES:
4 1/2" x 4 1/2" cardstock (for box base, I used Bazzill brown)
11" x 5 1/2" cardstock (for bag, I used Reece by TAC)
5" x 2 1/2" cardstock (for handles, I used Reece)
11" x 1" scalloped border (I used Reece)
4 brads or eyelets
Ribbon
Flower blossoms or other embellishment for front of bag
Scor-Pal
1" circle punch
Corner Rounder (for scalloped edging if needed)
Coluzzle Nested Circle template, knife, cutting mat
Adhesive
Scissors
Ruler
Pencil

DIRECTIONS:

1. Place the 4 1/2" square cardstock in the upper left corner of the Scor-Pal and score at 1" and 3 1/2". Turn it 1/4 turn and score again at 1" and 3 1/2". There should be a 1" border all the way around.


2. Turn cardstock over. On the left side of the square, cut on each horizontal score line in to the vertical score line. Do the same thing on the right side.


3. Fold the four sides up, placing the tabs on the inside.


4. Ahere the tabs to the inside.


5. On the back side of the 11" x 5 1/2" cardstock, use a ruler and pencil to draw a light line at the center. Use this as a guide to add your embellishments to the front - like poking holes here for your brads or eyelets if you use them. Add those embellishments to the front now. Be sure to leave a little more than 1" at the bottom for your scalloped border. If you're just using adhesive to add embellishments to the front, you can wait til the end if you want.

6. Use the 1" circle punch to punch a 1/2" circle/notch at the top. Use your pencil guideline for placement. We'll punch another 1/2 circle later.


7. Adhere the cardstock around the sides of the box. Start by lining up the front center pencil line in the center of a box side, then fold around the corners, and overlap in the back.


8. You will NOT fold at the corners all the way up to the top of the bag though! Only at the box so it's adhered nicely around the corners there.


9. Here's a picture showing how I made my scalloped border using my EK Success corner rounder. Bazzill also makes Border Strips that are already shaped. TAC sells these as well but I didn't have any to match this paper.


10. Adhere the scalloped border around the bottom.


11. Adhere the overlapping bag edges together up to the top. Now you can also punch your other 1/2 circle at the top.


12. Using the Nested Circle Coluzzle template, cut two circles from the 5" x 2 1/2" cardstock. You will cut on the center and the 3rd-from-center grooves. The inner circles will not be used here.


13. Adhere the handles in place lining them up over the 1/2 circle notches at the top. Also add a brad or eyelet on each side for extra reinforcement.


14. Tie handles together with ribbon.


There are so many possibilities for using this as a gift - money, gift cards, candy, stamping supplies or embellishments (*wink*), purse size lotions, candle, etc.

Here's another one I made using the Cha Cha collection by TAC:


Thanks for stopping by, hope you were inspired! Tootles!


A note from Julie

Another Fab Tutorial Vicki Thank you

Go and check out Vicki's brilliant blog HERE for more fantastic creations

If you follow Vicki's Tutorial to make your own gift box in a bag please leave a comment here to let us know :)

Snowflake Spinner - Tutorial

How it's made...

We start this by using a piece of A4 card stock and scoring it into 4 equal quarters as shown in picture 1 then cut away one of the quarters as shown in the 2nd picture.

Fold the card on the longest score line so that card is a tent shaped card.

On the side that is double thickness (2 layers) you need to cut out a circle making sure that you cut through both layers, I used a nestabilitie die.

When opened it should look like this.

I cut out 2 of each straight and scalloped edged circles the 2 scalloped circles are in a very pale pink card stock (you need to make the scalloped circles small enough to pass through the apertures you cut on the main card).

I stamped snowflake onto the plain circles and glued these on top of the scalloped ones.

I added double sided tape all over the back of the snowflake and stuck the 2nd snowflake on top of this by carefully aligning the scalloped edge.In the 2nd picture you can see the thread runs through the inside of the snowflakes (see arrows)

I used the snowflake embossing folder and wrapped this around the front of the card with the aperture cut out as this would not run through the cuttlebug I wrapped the back side of the card behind the folder as shown in the 2nd picture.

On the reverse of the cuttlebugged aperture I added 2 strips of double sided tape to adhere the silver thread to and hold the snowflake in place.

Add double sided tape over the silver thread and to the rest of the back of the aperture then fold over the other piece with the circle cut out and this will hide the silver thread making a neat finish

I added a sentiment to the bottom of the card some stickles for sparkle pearls to the snowflake center and knotted a ribbon around the top

& that's it your done!

A note from Julie

WOW what a fantastic card I'm definitely going to try this!!

Thanks for another great Tutorial Jak

Go and visit Jak's Crafters Kitchen Blog HERE you will definitely be inspired!

If you follow Jak's Tutorial to make your own spinner card please leave a comment with a link to your creation so that we can have a look :)