Using Fake Tattoos

I love using Rub Ons but sometimes I can't find exactly the one I need - OR they are so expensive I can't afford to stock such a huge range.
So I have taken to using kids fake tattoos as part of my "Rub On" range - they come in all shapes and sizes and best of all, they are tailor made towards the types of things the kids like!
They are particluarly good for boy LO's - especially the Tribal tattoo designs.

Follow these easy steps and have a try at putting some "Fake Rub ON's " on your LO:

You Need:
Container of water
Fake Tattoos
scissors
tissues
Your LO almost completed.




Place the tattoo on the spot you would like it to go FACE DOWN.



Wet a tissue until it is sopping but not DRIPPING and dab gently at the back of the tattoo. It will start to become less opaque.



Use the back of a spoon or an embossing tool to gently rub on the back of the tattoo to make it sure it "grabs".



Carefully peel off the tattoo.

*****

A note from Julie

What a great idea Sarah and a fantastic layout too!!

I'd never have thought about using fake tattoo's.

For more inspiration go and visit Sarah's fantastic blog HERE

Cupcakes YUM

I know there's a million cupcake cards etc out there but who can ever get enough of them...well now there's a million and one. Im sharing my cupcake card and pattern with you all.

For this card project you will need:

Vanilla or chocolate card stock for the base card.
Vellum for the front of the base card.(cupcake wrapper)
three different colours of card stock for the icing layers.
Red card for the cherry.
Brown card for the cherry stalk.
Cuttlebug emboss folders.
Ribbon and a cute tag.
different colour inks.
Gliter and Dimensional magic.




Now you have all this lets get started. Using the pattern below cut out the base card on the fold. the embossed vellum and cut to fit the front. Emboss the three icing layers with tree different emboss patterns.

Working with the base card...here shown as vanilla cake....attach double sided tape across the top and bottom of the card front and stick your vellum cupcake wrapper over the top. Using a brown ink and sponge, soften all the edges which will help hide the tape under the vellum and look like your cake is cooked to perfection.


Next Ink the edges of the icing layers in the colours to match, punch a 1" circle for the cherry and use the off cut of the circle punch(in brown) to help you cut a stalk, ink these two in black.

These are all our parts done now lets put it together. Lay a strip of foam tape along the top of your card frontTape down the largest icing layer paying attention to where the top of the card is.....shown here in arrows. this is the back view.

Next put another strip of foam tape on the lower part of the next icing layer so you wont see this tape showing at the back.

Do the same with the smallest icing layer.

Heres a back view of the card....the reason i show this is that if your going to make beautiful hand made cards you might as well do the best you can and make it look the neatest you can....no nasty foam tape showing here :)

Now you will shape your cherry with an embossing tool.

and attach foam tape to the back being carefull not to let the tape show after its stuck down.
Glue down the stalk and to acent the cherry ive use a small punch peice at the base of the stalk in black.
Heres a close up

Attach the ribbon...i made a card incert to cover the ribbon and tape inside the card.

An i used these cute little bread clip dies from sizzix for the message

Clip this over the ribbon and keep in place with some foam tape.

Lastly use some kindy glitz glitter on the embossed icing and dimensional magic or crystal laquar on your cherry to give it a yummy shine.

Good enough to eat!!!!!!!!

Hope you enjoy .........Valita

******

A note from Julie

ooh that really does look good enough to eat!!

Thanks for another fantastic tutorial Valita

Go and check out Valita's fantastic blog HERE

Seed Packet Holder

SEED PACKET HOLDER
by Vicki Hook

Supplies:
Cardstock Base:
4 1/2” x 11”

Patterned Cardstock:
2 3/4” x 3 3/8”
1 5/8” x 3 3/8”
Giga Scalloped Circle (punch one)

White Cardstock:
1 1/4” x 3”
Mega Circle (punch one)

Other Supplies:
1” circle punch, corner rounder, Scor-Pal, Coluzzle Nested Circle and Companion circle templates, stamps, ink, brad, glue

Directions:

1. With the long side across the top of the Scor-Pal, place the left end of the Cardstock Base on the 2 1/2” score line. The right end will be hanging off the side of the Scor-Pal. Score at 4 1/4” and 9”.

2. Turn it so the short side is across the top. Score at 1/2” and 4”.

3. Cut the 1/2” section off on both sides from the left end all the way down to the 9” score line.

4. Round the corners on the left end using the corner rounder.

5. Miter the corners on the remaining ½” sections on both sides.

6. Using the Coluzzle Nested Circle Template, cut a circle in the section that still has 1/2” sides. Use the “3rd from center” groove on the template and place the circle 1/2” up from the score line and centered side-to-side.

7. Using the Coluzzle Companion Circle Template, cut a circle in the 2 3/4” x 3 3/8” patterned cardstock. Use the “4th from center” groove on the template and cut a circle in the 2 3/4” x 3 3/8” patterned cardstock. Center it in both directions. Adhere it over the opening in the cardstock base.

8. Round two of the corners on the small white and patterned cardstocks. Stamp sentiment or image on the white, then adhere them to what will be the flap.

9. Stamp image or sentiment on the white Mega circle, then adhere it to the patterned Giga Scalloped Circle.

10. Attach the circles over the window with a brad at the top.

11. Fold on the score lines. Adhere the 1/2” sides to the back.

12. Place a packet of flower seeds inside the pocket.

13. And the scallop circle slides around for a peek through the window so you can see the flowers!

This makes a very cute birthday card/gift that is easy to mail! ENJOY!

******A note from Julie Thanks for another wonderful tutorial Vicki To visit Vicki's brilliant Blog click HERE